Loading... Please wait...

Our Newsletter

Sort by:

Toilet Supply Lines

Installing FloodSafe®

Installing FloodSafe® connectors is easy. Simply follow the steps below:

To Install:

  1. Turn off water supply at shutoff valve.
  2. Remove old supply connector.
  3. Install the end connection with the FloodSafe® device at the shutoff valve. Install the other end of the connector to the faucet inlet. Caution: Hand tighten the nuts plus ¼" turn with a wrench. Do not overtighten.
  4. Slowly turn on water at the shutoff valve to full open position.
  5. Check for leaks.

Important: Removing the faucet aerator or flow restrictor may cause the FloodSafe® to activate shutting off flow to the faucet.