250ml Flow Restrictor Spiral Kit
0 reviews
250 ML Flow Restrictor Spiral Kit, 1/4 IN Red Tubing and 1/4 IN Unions for Use with 24 GPD Membrane
SKU
WP622052
$9.26
Description
This flow restrictor 250 ML spiral kit is for use with 24 GPD membrane. It has 1/4 IN red tubing and 1/4 IN unions.
Features
- For use with 24 GPD membrane
- 250 ML flow rate
- Red spiral flow restrictor insert
- 1/4 IN red tube with 1/4 IN union connector
Cross Reference/Associated Item#:
- 122017
- 164015
- 122004
More
<
Instructions
Standard
NEW FLOW RESTRICTOR INSTALLATION:
- Remove the black tube at the end of the membrane housing (see diagram below)
- Remove the existing flow restrictor
- Install new flow restrictor as follows:
Please review this guide to learn how to remove the existing flow restrictor and add the new one.
Manifold
- Turn water off to system at Adapt-A-Valve & drain tank by leaving RO faucet open.
- Remove existing flow restrictor by un-screwing it and cut it as shown in the diagram below:
- Disconnect red tube at port labeled DRAIN; then install the new Flow restrictor tube into that port & connect red tube from faucet to supplied connector as shown below:
