• (800) 752-5582
What You Need To Know About TDS In Your Water
TDS in the water supply is quickly becoming a major issue that homeowners are constantly facing. Look here to learn what you need to know about TDS!

What You Need To Know About TDS In Your Water

Minerals and salts that have dissolved in the water are frequently the causes of drinking water that doesn't taste or look good. Total dissolved solids (TDS) is a term used to describe these substances. Here is what you need to know about TDS in your water to ensure that you are kept safe!

What Is TDS?

What is TDS (total dissolved solids) in water? The levels of dissolved ions in your water, such as calcium, magnesium, potassium, sodium, and nitrates, are referred to as TDS. They are found naturally in water after it has passed through bedrock and soil. A certain amount of dissolved solids in water is normal and even useful, but when TDS levels rise above what would naturally collect, issues arise. TDS levels and composition may be determined with tests, and treatments can give you safer, better-tasting water right from the tap.

Effects of Dissolved Solids in Water

Stormwater runoff, agricultural runoff, and salt and other minerals that are employed as road deicers all contribute to abnormally high TDS levels in municipal and well water. The Environmental Protection Agency (EPA) recommends a TDS level of less than 500 mg/L (500 ppm) in water supplies to minimize problems with taste, odor, and color; however, you may detect these concerns at much lower levels. TDS can cause discoloration in water, as well as the following symptoms:

  • A cloudy and murky look.
  • A salty, bitter, or metallic taste.
  • Pipes or fixtures that have corroded.
  • Appliances that use water have a shorter lifespan.

 

How To Look for TDS in Your Water

TDS levels (and other potential concerns) should be tested periodically by well owners, according to the EPA. Residents who acquire their water from public sources should also test it because the threshold of maintaining TDS below 500 ppm is simply a guideline—the EPA does not enforce it. A TDS meter is a hand-held instrument that may be used to measure the quantity of TDS in your water at home. However, it will not tell you the whole tale. Many minerals, such as calcium, magnesium, and potassium, may be present in your water. On the other hand, your water may contain problems that you can't see, taste, or smell, such as increased levels of toxins like lead and arsenic. TDS water testers can't tell you how clean your water is because they can't tell you how clean it is overall.

We hope this article about what you need to know in relation to TDS in your water has helped you get a grasp of the situation! If you are overly concerned about the TDS in your water, be sure to investigate reverse osmosis water faucets. These faucets will act as filters, ensuring you have the cleanest water possible!

WTS (Common Stock)   Exchange: NYSE (USD)   Last Trade: $62.64   Change: 1.14 (1.854%)

Aug 5 1:59PM GMT--04:00. Starting August 25th Live Feed