Brushed Stainless Steel Air-Gap Standard Faucet
This standard reverse osmosis and water filtration, air-gap brushed stainless steel faucet features Touch N'Flow spring loaded handle for one touch water dispensing and 1/4 IN supply tubing connection. This faucet requires access to a drain connection. The faucet conforms to all US Plumbing Codes.
US Plumbing Code (5-202.13 Backflow Prevention, Air-Gap. An air gap between the water supply inlet and the flood level rim of the plumbing fixture, equipment, or nonfood equipment shall be at least twice the diameter of the water supply inlet and may not be less than 25 mm (1 IN).)
Features
- Standard brushed stainless steel air-gap faucet
- Features Touch N'Flow spring loaded handle for one touch water dispensing
- 1/4 IN supply tubing connection
CALIFORNIA PROP 65 WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Tubing Connections
- 1/4 IN Blue tube approximately 4 FT in length for connecting drinking water.
- Order part# 125016 for 3/8 IN supply tubing.
- 1/4 IN Red tube approximately 4 FT in length for connecting to the rinse water portion of the filtration system.
- 3/8 IN Black tube approximately 3 FT in length for the connection to the drain.
Product Details
- Dimensions:1 3/4 IN x 8 1/2 IN
Contents
- Faucet with tubing connected
- Parts Bag
- Instructions