This is a Top Mount Twist Reverse Osmosis and Water Filtration Air-Gap Faucet with a stylish curved design. It is Monitored and will alert you when it is time to change your filters. This works on a timer system, it does not know when you physically changed your filters. You will be alerted based upon the amount of time the faucet is in the on position (blue light will be blinking when on) with a blinking red light. This Faucet requires access to a drain connection. The Faucet conforms to all US Plumbing Codes.
US Plumbing Code (5-202.13 Backflow Prevention, Air-Gap. An air gap between the water supply inlet and the flood level rim of the plumbing fixture, equipment, or nonfood equipment shall be at least twice the diameter of the water supply inlet and may not be less than 25 mm (1 inch).)
- Brushed Nickel Finish
- Top Mount Twist Design
- Variable Flow Lever for dispensing
- Monitored (Timer 6 month)
- Connect the hoses to the quick-connect fittings.
- Install the Lower Faucet Assembly by tightening the screws from the top (No tightening of fittings from the bottom)
- Snap the Upper Faucet Assembly onto the base with a simple twist
- 1/4 inch Blue tube approximately 4 feet in length for connecting drinking water.
- 1/4 inch Red tube approximately 4 feet in length for connecting to the rinse water portion of the filtration system.
- 3/8 inch Black tube approximately 3 feet in length for the connection to the drain.
- Width: 2.21 (inches at base)
- Height: 10.5 (inches from base to top of the curve)
- Model #: 116187
Cross Reference/Associated Item #