1. Low / Slow Production:
a) Low Incoming Water Pressure: Assure a minimum of 40 PSI of incoming water pressure. Watts Premier offers a booster pump if home water pressure is too low. Make sure water supply is turned on and Adapt-a-Valve is fully open.
b) Crimps in tubing: Check tubing and straighten or replace as necessary.
c) Clogged pre-filters: Replace pre-filters (Typically every 6 months).

2. Milky Colored Water:
a) Air in system: Air in the system is a normal occurrence with initial start up of the filtration system. This milky look will disappear during normal use within 1 to 2 weeks. If condition reoccurs after a filter change, drain the storage tank 1 to 2 times.