Free Shipping On All Orders $15 And Over!

500ml Flow Restrictor Spiral Kit

0 reviews

500 ML Flow Restrictor Spiral Kit, 1/4 IN green tubing and 1/4 IN unions for use with 50 GPD membrane

Available
SKU
WP622055
$7.51
Description

This flow restrictor 500 ML spiral kit is for use with 50 GPD membrane. It has 1/4 IN green tubing and 1/4 IN unions.

Note: Zero Waste Units require the 700 ml Flow Restrictor (WP622054).

 

Features

  • For use with 50 GPD membrane
  • 500 ML flow rate
  • Green spiral flow restrictor insert
  • 1/4 IN red tube with 1/4 IN union connector

 

Cross Reference/Associated Item#:

  • WP222010
  • WP122051
More

<

Instructions

Standard

NEW FLOW RESTRICTOR INSTALLATION:

  1. Remove the black tube at the end of the membrane housing (see diagram below)
  2. Remove the existing flow restrictor
  3. Install new flow restrictor as follows:

Please review this guide to learn how to remove the existing flow restrictor and add the new one.

 

Manifold

flow-res-manifold-1.jpg

 

    1. Turn water off to system at Adapt-A-Valve & drain tank by leaving RO faucet open.
    2. Remove existing flow restrictor by un-screwing it and cut it as shown in the diagram below:

 

Flow Restrictor Install

 

    1. Disconnect red tube at port labeled DRAIN; then install the new Flow restrictor tube into that port & connect red tube from faucet to supplied connector as shown below:

 

flow-res-manifold-2.jpg