610026 - Leak Protector Replacement Tablets (2 Pack), by Watts Premier
Leak Protector

610026 - Leak Protector Replacement Tablets (2 Pack), by Watts Premier

  • Vendor:Premier a Watts Brand
  • Category: All, Specialty Kits, Specialty Kits - Leak Protector
Availability: In Stock
$ 6.55
Wishlist Compare

Leak Protector by Watts® replacement tablet 2-pack

Two tablets are included with each Leak Protector, and replacement tablets are available (Part No. 610026), packaged two per pack.

Specifications:
Maximum oiperating pressure = 100 psi
Maximum ambient humidity = 70%

CAUTION:
Keep Leak Protector Replacement Cartridges (pads) out of the reach of children.

 

Installation:

Replacing The Tablet

Step 1 Turn off the water supply at the cold water valve.  leak-detector-replacel-1.jpg
Step 2
Using a Phillips screwdriver, loosen and remove screw from the top of the valve.
Step 3
Twist the upper white assembly counter clockwise, lift up and remove old tablet.
Step 4 Make sure the valve and the surrounding area is dry before replacing the tablet.
Step 5 Insert the new applicator tablet into the clear plastic housing.
Step 6 Replace the upper white cap onto the clear plastic base by twisting it clockwise until seated.
Step 7 Replace Phillips screw and tighten (do not over tighten as this may damage the valve unit).
Step 8 Turn on the water supply to the filtration unit and check for leaks.

CAUTION:
Keep Leak Protector Replacement Cartridges (pads) out of the reach of children.

Additional Information

Installation Instructions

Troubleshooting guide

Replacement Tablets