Brushed Nickel Air-Gap Top Mount Twist Monitored Faucet
Brushed Nickel Air-Gap Top Mount Twist Monitored Faucet.
NOT AVAILABLE FOR SALE IN THE STATE OF CALIFORNIA.
This is a Top Mount Twist Reverse Osmosis and Water Filtration Air-Gap Faucet with a stylish curved design. It is Monitored and will alert you when it is time to change your filters. This works on a timer system, it does not know when you physically changed your filters. You will be alerted based upon the amount of time the faucet is in the on position (blue light will be blinking when on) with a blinking red light. This Faucet requires access to a drain connection. The Faucet conforms to all US Plumbing Codes.
US Plumbing Code (5-202.13 Backflow Prevention, Air-Gap. An air gap between the water supply inlet and the flood level rim of the plumbing fixture, equipment, or nonfood equipment shall be at least twice the diameter of the water supply inlet and may not be less than 25 mm (1 IN).)
Features
- Top mount twist design faucet for water filtration devices
- Features built-in air gap and brushed nickel finish
- Includes a variable flow lever for dispensing water
- Easy to install, top mount with no need to tighten fittings from under the counter
- Monitored design alerts you when it is time to replace your filters (approximately every six months)
- 1/4 IN supply tubing connection
Tubing Connections
- 1/4 IN Blue tube approximately 4 feet in length for connecting drinking water.
- 1/4 IN Red tube approximately 4 feet in length for connecting to the rinse water portion of the filtration system.
- 3/8 IN Black tube approximately 3 feet in length for the connection to the drain.
Product Dimensions
- Width: 2.21 (INes at base)
- Height: 10.5 (INes from base to top of the curve)
Contents
- Faucet
- Tubing
- Instructions