Zero Pure Plus (VOC) RO System
Zero Pure Plus VOC 4 Stage Reverse Osmosis System, with push button filters
The Zero Pure Plus reverse osmosis filtration system combines the space saving, compact design of the RO Pure Plus and the water conservation of a ZeroWaste (R) Unit. Our patented design reverse osmosis system does not waste water by returning the unused waste water from the system back to the home’s hot water supply. Changing the filters is as easy as pushing a button. With the built in shut off valve when removing the filters there is no mess like traditional models. The filters snap out and are easily inserted. Must be installed a minimum of 25 pipe feet from water heater. Not recommended for use on homes equipped with tankless water heaters.
- Sediment - A 5 Micron Sediment Filter traps sediment and other particles like dirt, silt and rust which affect the taste and appearance of your water.
- Carbon - A 5 Micron Carbon Block Filter reducing Chlorine, and other materials that cause bad taste and odor.
- 50 GP Membrane - A Semipermeable Membrane removes TDS, Sodium and a wide range of contaminants such as Chromium, Arsenic, Copper, and Lead.
- VOC (Volatile Organic Chemical)- A high quality VOC Final Polishing Filter after the water storage tank to remove MTBE's, Atraine, Benene, Chloroform, Lindane and other VOC's from your drinking water.
Features
- Kit includes ZeroWaste pump with solenoid, 3 gallon metal storage tank, module with one full set of filters including 50 GPD membrane, brushed nickel top mount twist airgap faucet, Adapt-A-Valves, and manual
- Built in check valves shuts off water flow when filters are removed for a no-mess, push button release filter change
- Conveniently fits under most sinks with minimal space requirements, electrical receptacle needed
- VOC (Volatile Organic Compound) Carbon Block - high quality VOC final polishing filter for great reduction on, herbicides, pesticides, MTBE's, Atrazine, Benzene, Chloroform, Lindane and many other VOC's from your drinking water
- Requires a 110V non-switched electrical outlet independent from the garbage disposal to provide power to the pump
Important Information
- Requires a 110 volt electrical outlet independent from the garbage disposal.
- Not recommended for use on homes equipped with tankless water heaters.
- Not recommended for use on homes equipped with a backflow prevention on the hot water heater.
- Must be installed a minimum of 25 Pipe Feet from water heater.
- A Non-Switched outlet is needed to provide power to the pump.
CALIFORNIA PROP 65 WARNING: This product can expose you to chemicals including 1,3-Butadiene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Click here to download your Zero Pure Plus Manual.
For the return policy details, please click here.
Parameters
Parameter | Minimum | Maximum |
Operating Temperatures: | 40 °F (4.4 °C) | 100 °F (37.8 °C) |
Operating Pressure: | 40 psi (2.81 kg/cm2) | 85 psi (6.0 kg/cm2) |
pH Parameters: | 2 | 11 |
Iron: | N/A | 0.2 ppm |
TDS (Total Dissolved Solids): | N/A | <1800 ppm |
Turbidity: | N/A | <5NTU |
Hardness: | N/A | 10 Grains Per Gallon |
*The Zero Pure Plus Reverse Osmosis System will operate with hardness over 10 grains per gallon but the membrane life may be shortened.
Content
- Reverse Osmosis Filtration System
- ZeroWaste(R) Pump w/Solenoid Stand, Assembled
- 3-Gallon Storage Tank
- Module with one Full Set of Filters including 50 GPD Membrane Pre-Installed
- Designer Brushed Nickel, Top Mount Twist, Air-Gap Faucet
- Adapt-A-Valve(TM)
- Manual
Product Dimensions
- Rack and Cartridges (11.6" W x 13.5" H x 3.7" D)
- Tank (13.6" H x 11.0" D)
- Pump & Solenoid (5.7" W x 13.0" H x 3.9" D)
(Due to the individual fittings the exact measurements may vary slightly).